Zone 1 Flame Proof 2*18w Led Explosion Proof T8 Fluoresce Light
1. The shell is made of ZL102 cast aluminum + SPCC, dust-proof and
explosion-proof, and easy to install
2. This lamp adopts flame-proof design, with constant current drive
and wide input power supply.
3. Made of AL+SPCC+ glass material, simple design, easy to
disassemble
4. The clear parts use toughened glass and mesh enclosure which
with high light transmittance and meet the requirement of impact
strength.
5. The lamp shell adopts die-casting aluminium alloy with excellent
heat dissipation and meet requirement of explosion-proof intensity.
6. The light source uses chips that with a high lighting
efficiency, high CRI and long life span.
7. Multiple installation methods can be boom type, suction top
type, wall type and other installation methods, widely applicable
8. This lamp with a excellent performance, is suitable for three
phase AC127V neutral grounding power system underground coal mine,
used for fixed lighting in laneway and chamber where methane or
coal dust exist.
Feature:
1. Voltage electrostatic plastic-spray surface.
2. The transparent explosion-proof toughened glass tube and the
protective net cover are used as the lamp tube, which has high
light transmittance and meets the requirements of impact strength.
3. The professionally designed LED light source heat dissipation
structure is built in the lighting category, which has good thermal
conductivity and meets the requirements of explosion-proof
structure. At the same time there are T5/T8 fluorescent tube
options.
4. Large number of led light sources, matrix layout, uniform light
output and wide light output range.
5. Steel pipe wiring or cable wiring.
Application:
1. It is applicable to the places in Zone 1 and Zone 2 of explosive
gas environment;
2. It is applicable to the places in Zone 21 and 22 of combustible
dust environment;
3. Suitable for IIA, IIB and IIC explosive gas environment;
4. Applicable to T1~T6 temperature groups;
5. It is applicable to energy-saving transformation projects and
places where maintenance and replacement are difficult;
6. It is widely used for lighting in oil exploitation, oil
refining, chemical industry, gas station, textile, food processing,
offshore oil platforms, oil tankers and other places.
7. Typical applications include:
Oil and gas industries
Chemical, petrochemical
Pharmaceutical industries
Pulp and Paper
Waste and sewage treatment
Application
BPY explosion-proof LED explosion-proof lamp is suitable for fixed
lighting places such as mine tunnels and chambers where methane or
coal dust explosion is dangerous.
There are also tunnels, pharmaceutical factories, chemical plants
and other zone1,2 & zone 21,22 are flammable and explosive
dangerous places
Specification:
| Ex Marking | Ex d IICT4Gb |
| Classification | Group II, Catogory 2 GD; Class I, Division 1 and 2,Group A,B,C,D;
Zone 1, 2 & Zone 21, 22 |
| IP Degree | IP65 |
| Corrosion Resistant | WF1 / WF2 |
| Input Voltage | 220VAC, 50HZ |
| Conduit Entries | G 3/4” |
| Battery Back-up | Optional, Emergency time>90min;Charging time:24h; |
| Mounting Styles | Pendant; Ceiling; Chain; Embedded; Wall; |
Company introduction:
Changzhou JUJUN Ex-proof company is a comprehensive enterprise
integrating R&D, production, sales and service.
We mainly produce and operate maintenance-free LED explosion-proof
lamps, explosion-proof lamps, explosion-proof electrical
appliances, explosion-proof accessories, low-voltage electrical
components, molds, power distribution switch control equipment and
other products.
It is located in the Yangtze River Delta region, on the verge of
Shanghai, with convenient transportation, welcome customers to
visit our factory.
FAQ:
Q1. Can I have a sample order for explosion proof led light ?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time of explosion proof led light?
A:Sample needs 5-7 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit for explosion proof led light?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 7-10
days to arrive. Airline and sea shipping also optional.
Q5: Do you offer guarantee for explosion proof led light?
A: Yes, we offer 3-5 years warranty to our products.
Q6: is OEM or ODM available for explosion proof led light?
A: Yes
Q7: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with
new order for small quantity. For
defective batch products, we will repair them and resend them to
you or we can discuss the solution i
ncluding re-call according to real situation.
Products details:
Contact information:
Emma
Wechat: 15995033689
whatsapp: +86 15995033689
