High Quality T5 T8 Flameproof Tube Light IP66 Ex Proof Fluorescent
Lighting
Features of the product:
1. Scope of application: zone 1, zone2, zone21, zone22 hazardous
area locations
IIA, IIB explosive gas atmosphere
2. The shell is made of ZLIO2 aluminum alloy die-casting, and the
surface is high-voltage electrostatic spray
3. Tempered glass cover, with strong impact resistance
4. Both steel pipe and cable wiring are acceptable
5. Thread only: G3/4”
technical parameter:
Rated voltage: AC220V50/60HZ, rated power: 9Wx1, 9Wx2 (type l)
18Wx1x 18Wx2 (type ll)
Explosion-proof mark: ExdembllCT6Gb/ExtDA21 IP66T80°C, protection
level: IP66, corrosion protection level: WF2
Optional function: human body induction.
Lead-in device: M25X1.5 lead-in specification, suitable for
9mm~12mm cables, terminal block: W4mm, reliable wire connection
Installation method: Ceiling type (X), wall type (b), boom type 1
(g1), boom type 2 (g2), guardrail type (h), flange type (f),
hanging chain type (L ), curved rod type (w)
Specification:
| Ex Marking | Ex d e IIC T4 Gb; Ex tD A21 IP66 T80℃ |
| Classification | Group II, Catogory 2 GD; Class I, Division 1 and 2,Zone 1, 2 & Zone
21, 22 |
| IP Degree | IP66 |
| Corrosion Resistant | WF1 |
| Input Voltage | 110-220VAC, 50/60HZ |
| Conduit Entries | G 3/4” |
| Battery Back-up | Optional, Emergency time>90min;Charging time:24h;Starting
time:0.3s |
| Mounting Styles | Pendant; Ceiling; Chain; Embedded; Wall; Stanchion |
Ordering Information| Model No. | BYS600 | BYS1200 |
| T8 Fluorescent Tube | (1~3)*18W(1350Lm, 75lm/W) | (1~3)*36W(2700Lm, 75lm/W) |
| T5 Fluorescent Tube | (1~3)*14W(1350Lm, 96lm/W) | (1~3)*28W(2100Lm, 75lm/W) |
| LED Tube | (1~3)*8W(800Lm, 100lm/W) | (1~3)*18W(1800Lm, 100lm/W) |
The BYS-2X18W Explosion Proof Fluorescent Fixture from Crown Extra
is ATEX/IECEx approved for Zones 1 and 2 and 21 and 22. This
18-watt unit is equipped with two, 4-foot T8/T6 LED tube lamps that
operate on 220-240V AC.(can choose LED tube) The IP66-rated fixture
is made out of non-sparking materials that are highly resistant to
rough impacts (IK10). This fluorescent lamp can be mounted on
ceilings or walls using a pair of stainless steel mounting
brackets.
Operation precautions:
1. Don't switch explosion-proof and anti-corrosion fluorescent
lamps too frequently;
2. If the voltage is very low, the two stages of the lamp will emit
tungsten at the beginning of lighting, which will cause a lot of
dot-shaped pollutants inside the lamp, which will become one of the
reasons for the damage of the lamp. Therefore, it is recommended to
Turn on the lights under high voltage conditions;
3. Explosion-proof and anti-corrosion fluorescent lamps have many
lines and need auxiliary devices, so they must be used in
conjunction with corresponding transformers, capacitors, etc. to
ensure that the lamp is started to a suitable power;
4. Pay attention to maintain a ventilated environment, not only to
take away the dust, but also to reduce the temperature of the lamp,
so as to extend the life of the lamp.
Company introduction:
Changzhou JUJUN Ex-proof company is a comprehensive enterprise
integrating R&D, production, sales and service.
We mainly produce and operate maintenance-free LED explosion-proof
lamps, explosion-proof lamps, explosion-proof electrical
appliances, explosion-proof accessories, low-voltage electrical
components, molds, power distribution switch control equipment and
other products.
It is located in the Yangtze River Delta region, on the verge of
Shanghai, with convenient transportation, welcome customers to
visit our factory.
FAQ:
1. who are we?
We are based in Jiangsu, China, start from 2016,sell to North
America(20.00%),Central America(15.00%),Eastern Asia(12.00%),South
Asia(10.00%),Mid East(10.00%),Southeast Asia(10.00%),Domestic
Market(4.00%),Africa(4.00%),South America(2.00%),Northern
Europe(2.00%),Eastern Europe(1.00%),Oceania(1.00%),Southern
Europe(1.00%),Western Europe(1.00%). There are total about 101-200
people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Spray booth,prep station,car washing machine,car lift,powder
coating line
4. why should you buy from us not from other suppliers?
Yancheng Biaosin Import&Export Co.,Ltd is in yancheng city,in
charge of the export and import of jiangsu jing-zhongjing industry
coating equipment. We're enterprise specializing in manufacture and
sales of industrial painting equipment,and relaited machine
Products details:
Contact information:
Emma
Wechat: 15995033689
whatsapp: +86 15995033689
